Mock Up Your Mudroom Bench Before You Build It

Use a chair, a cardboard box, and the shoes you wear most to test the height, depth, and storage of a mudroom bench.

A mudroom bench looks simple until you try to fit shoes, bags, and a place to sit into the same stretch of wall. If the shoes stick out into the walkway or the bags land right where you want to sit, you’ll feel it every time you come through the door.

Start with a chair or sturdy bench you already find comfortable. Measure the seat height and see how it feels when you’re putting on your shoes. If you want a cushion, include its thickness when you talk about the finished seat height. Then use painter’s tape on the floor to mark the planned bench depth. Walk past it carrying a grocery bag and open any nearby doors all the way. That gives you a better feel for the traffic through the space.

For storage below, measure the actual boots, bins, or shoes you plan to keep there. A pair of work boots takes up a different amount of room than kids’ sneakers, especially when you need clearance to slide them out. If you want a removable boot tray, make sure it can clear the opening while you’re holding it level. That comes in handy when there’s water or grit in the bottom.

I’d also mock up the hooks. Hold a coat or loaded backpack at the height you’re considering and see where the bottom lands. If it hangs into the sitting area, you can move the hooks toward one side or give the bags their own section. Check reach with the people who’ll actually use them.

Once you’ve got a layout, leave the tape down for a day. Go through your regular routine and see where things naturally land. That’s usually enough time to spot a change worth making before anything gets built.

Next
Next

Why a Built-In Needs Room for a Scribe Strip